Water based, ready to use petroleum based oil emulsion for practically all mold types with the exception of latex rubber or foam.
WATER BASED FORM RELEASE - READY TO USE
F-5 Enviro Mold Release Agent is a ready to use, water based, chemically active emulsion designed for applications where solvent based releases are not preferred or allowed. F-5 Enviro release will not transfer or stain the cast surface, which allows the hardened concrete to accept coatings, paints, or caulks without any inter-coat adhesion problems. The final concrete may be painted with latex or oil based paints or coatings without any detrimental loss of bond. This makes the F-5 Enviro an ideal choice for precast concrete panel production.F-5 Enviro is safe to use on steel, plywood, aluminum fiberglass, ABS, urethane, and plastic molds or form liners.
- V.O.C. compliant in all states.
- Environmentally safe.
- Minimizes surface defects and voids (bugholes).
- Prevents build-up.
COMPOSITION: Blend of emulsified petroleum oil, synthetic surfactants and fatty acids. Does not require reporting under SARA 313 (Community Right to Know).
VOC COMPLIANCE: F-5 Enviro contains less than 250 g/L (2.08 lb. /gal.) volatile organic compounds. Meets existing form release agent VOC (VOM) regulations under the EPA’s National AIM (Architectural and Industrial Maintenance) listings for all states including OTC, LADCO, CARB, and SCAQMD.
SHIPPING NAME: COMPOUNDED, EMULSIFIED PETROLUEM OIL
SHIPPING CLASS: ITEM 33880, SUB 2, LTL 55
AVAILABLE IN: 5 gallon (18.9 L) pails, 55 gallon (208 L) drums, 265 gallon (1000 L) containers